Welding is the process of joining two separate pieces of metal together through fusion or diffusion. Brazing is the process of joining two separate pieces of metal together through diffusion by using a lower melting point filler between faying surfaces. The Welding Task Group covers the main welding processes used in the Aerospace Industry, torch & induction brazing, and where applicable; welder qualification, and/or evaluation of welds (e.g. metallographic assessment).
Formed in 1995, the goal of the Welding Task Group is to provide a baseline level of confidence in the supply chain that common requirements among subscribing companies can be met. Any company that is accredited for welding under the Nadcap program is regarded as a capable supplier that any subscribing company could use as a vendor. The Task Group covers 9 different joining processes. The most common are Gas Tungsten Arc Welding (GTAW), Resistance Welding, Torch & Induction Brazing, and Electron Beam Welding. The Nadcap program performs approximately 600 Welding Audits per year with around 925 accredited companies.
View our "How to Get Started" page and walk through the necessary steps you'll need to take and get resources or create an EAN account to request a quote.

What are WLD Industry Challenges?
- Ensuring welding processes meet common industry and customer-specific requirements
- Reviewing individual jobs against contractual requirements to verify customer-level compliance
- Addressing nonconformances through thorough root cause and corrective action to prevent recurrence

How a Nadcap WLD Accreditation Supports You
- Mitigated in-service risk of product failure
- Reduced rework
- Improved product quality
WLD Nadcap Audit Criteria
AC7110 – Welding / Torch and Induction Brazing and Additive Manufacturing
AC7110/1 – Brazing
AC7110/2 – Flash Welding
AC7110/3 – Electro Beam Welding
AC7110/4 – Welding for Resistance
AC7110/5 – Fusion Welding
AC7110/6 – Laser Welding
AC7110/7 – Rotational/Friction/Inertia Welding
AC7110/8 – Diffusion Welding
AC7110/9 – Percussion Stud Welding
AC7110/12 – Welder/Welding Operator Qualification
AC7110/13 – Evaluation of Weld Joints and Torch and Induction Braze JointsThe PRI EANSM platform provides suppliers with a single place to view, understand, and navigate Nadcap Audit Criteria so you know exactly what will be assessed before, during, and after an audit. Create an EAN account to access the criteria and learn what you need to know to support your Nadcap accreditation.
Common Nonconformances Found During an WLD Audit
- Content
Compliance to the weld schedule - This is a compliance requirement located in paragraphs 11, 12 and 13 of the weld process checklists. The Auditee must demonstrate that the parameters/setting and weld tasks specified in the procedure are being done in accordance with the approved document.
- Content
When Auditees receive NCRs, they are closed using a through root cause and corrective action process that ensures the issue does not recur.
- Content
Insufficient purchasing controls - No documented procedures that define the specification and certification requirements including receiving inspection verification responsibilities for welding consumables such as filler material or gas. These requirements are located in the fusion weld and brazing checklists, AC7110/5 and AC7110/1 in multiple sections. The intent is to ensure consumable requirements are correctly defined thereby ensuring Customer specifications are met. Auditees are often found to have no systematic control over purchasing and receiving and rely on employees to know what is needed.
