Nonconventional Machining (NM) addresses different critical processes in the Aerospace industry used to cut metallic parts. Some of these processes have been in use since the 1930s. The mains processes covered by NM are Electro Chemical Machining, this includes the sub methods of Electrochemical Drilling, Precision Electrochemical Machining, Shaped Cathode Electrochemical, and Shaped Tubed Electrochemical Machining. A similar process is Electrochemical Grinding which is also covered under NM.
The most widely used NM process is Electrical Discharge Machining which has sub methods sinker, rotating electrode (or Fasthole), and wire. A similar process to this which is covered by NM is Spark Erosion Grinding. Laser Beam Machining, which was developed throughout the 1970s is used for both cutting, drilling, and marking operations. The final process covered under NM is Abrasive Water Jet Machining (AWJM). The similarity to these processes is that all of them cause surface integrity concerns, detrimental areas along the cut, which are more susceptible to cracks and failure. Therefore, NM processes must be tightly controlled as a critical process.
The NM Task Group’s first Audits occurred in 2002 to control this process in Aerospace applications. Later in the late 2000s because the NM and SE Task Groups were of a comparable size, the groups were combined into the NMSE Task Group and oversight was provided by the same group of Subscribers. Today, the NM Task Group performs approximately 275 Audits annually and holds 402 supplier accreditations.
View our "How to Get Started" page and walk through the necessary steps you'll need to take and get resources or create an EAN account to request a quote.

What are NM Industry Challenges?
- Improper documentation of the process
- Failure of program and software controls
- Improper process for conductivity calibration
- No reverification of equipment after measurement of calibration setup
- Failure to verify part programs

How a Nadcap NM Accreditation Supports You
- Reduced costs associated with product malfunction, returns, complaints and equipment failure
- Improved reputation and credibility in the industry
- Customer attrition due to inability to satisfy requirements
- Improved on-time delivery
NM Nadcap Audit Criteria
AC7116 – NM Accreditation
AC7116/1 – Electrochemical Machining
AC7116/2 – Electrochemical Grinding
AC7116/3 – Electrical Discharge Machining
AC7116/4 – Laser Beam Machining
AC7116/5 – Laser Part Marking
AC7116/6 – Spark Erosion Grinding
AC7116/7 – Abrasive Water Jet MachiningThe PRI EANSM platform provides suppliers with a single place to view, understand, and navigate Nadcap Audit Criteria so you know exactly what will be assessed before, during, and after an audit. Create an EAN account to access the criteria and learn what you need to know to support your Nadcap accreditation.
